MCQs on Welding Basics-1
1 - Question
Pinch effect in welding is the result of?
a) Electromagnetic forces
b) Electrostatic forces
c) Magnetic forces
d) Electric forces
Explanation: Pinch effect in welding gives narrow and long flame which is concentrated on the desired part and is achieved by an induction coil, which results in electromagnetic forces.
2 - Question
The junction between weld face and base metal is known as?
Explanation: The junction of the weld face and the base metal is known as ‘toe’. For a better weld, the junction should be as small as it can be in size.
3 - Question
The junction between two workpieces and weld face is known as?
Explanation: The throat of a weld is the distance from the centre of the face to the root of the weld. Typically, the depth of the throat should be at least as thick as the thickness of the metal we are welding. advertisement
4 - Question
The portion at which two workpieces are at the nearest distance is called?
Explanation: The weld root is the point at which the back of a weld intersects with the base metal surfaces. It determines the weld penetration and fusion to form a rigid joint.
5 - Question
The portion of weld joint that is melted by the heat of melting is called as ______________
Explanation: The arc spot or “puddle” weld is started by striking an arc on the deck surface, causing a hole to form in the deck. The weld operation then continues by depositing electrode material on the beam or joist and allowing the molten “puddle” to engage the penetrated deck.
6 - Question
Small weld used to temporarily hold the two pieces is called as ______________
b) base metal
c) tack weld
Explanation: Tack welds are essentially temporary welds that help to hold two metals in place. The main purpose of the tack weld is to hold the two pieces of metal in place while we apply the actual, final weld.
7 - Question
What is the function of a torch?
a) It controls fuel rate
b) It mixes fuel and oxygen and controls delivery
c) It controls oxygen rate
d) It mixes fuel and hydrogen
Explanation: Torch mixes fuel and oxygen and controls delivery. It has two control valves, one for controlling the flow of acetylene and the other of oxygen, entering a chamber called mixing chamber where the two gases are mixed in a correct proportion.
8 - Question
The depth up to which, the filler material is mixed up with base metal is called?
d) Fusion depth
Explanation: The depth up to which the filler material is mixed up with base metal is called as penetration. Penetration can be increased by increasing temperature and appropriate flux.
9 - Question
Weld pass is associated with the movement of __________
Explanation: A single progression of welding or surfacing along a joint or substrate. The result of a pass is a weld bead.
10 - Question
The raised potion from the parent metal in welding is known as __________
b) fusion depth
Explanation: Weld metal in excess of the quantity required to fill a joint. This can be machined for a good surface finish.