MCQs on Shaper Mechanism
1 - Question
Which of the following shaper machine cuts in return stroke?
a) Vertical shaper
b) Horizontal shaper
c) Draw cut shaper
d) Universal shaper
View Answer
Explanation: Draw cut shaper cuts in the return stroke. While in general cutting takes place in forward stroke.
2 - Question
Slotted link of crank and slotted lever mechanism is also known as
a) Lever
b) Rocker
c) Crank
d) None of the mentioned
View Answer
Explanation: As slotted arm does not make complete revolution during cutting, hence it is also known as rocker.
3 - Question
Slotted link of crank and slotted link mechanism is pivoted to
a) Fulcrum
b) Lever
c) Tool
d) None of the mentioned
View Answer
Explanation: Slotted link is pivoted to fulcrum. Slotted arm does not make complete revolution during cutting. advertisement
4 - Question
Time of return stroke is ________ the time of forward stroke in crank and slotted link mechanism.
a) Less than
b) More than
c) Equal to
d) None of the mentioned
View Answer
Explanation: of return stroke is less than the time of forward stroke in crank and slotted link mechanism. It reduces the time of idle stroke.
5 - Question
In crank and slotted link mechanism, cutting angle is 220 degrees. What should be the return stroke angle?
a) 12
b) 90
c) 140
d) 360
View Answer
Explanation: Return stroke angle = 360 – cutting angle. Cutting takes place in forward stroke.
6 - Question
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Inclination of slotted lever with vertical at extreme position in degrees is equal to
a) 25
b) 23.6
c) 28.3
d) 20
View Answer
Explanation: Use simple geometry in a triangle. Return stroke angle = 360 – cutting angle.
7 - Question
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Ratio of cutting stroke time to return stroke time will be
a) 5
b) 2.6
c) 1.7
d) 0
View Answer
Explanation: Ratio of cutting stroke time to return stroke time = (cutting angle/return angle).
8 - Question
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Cutting angle in degrees is equal to
a) 47.2
b) 12.3
c) 56
d) 69.3
View Answer
Explanation: Use simple geometry in a triangle to find cutting angle.Return stroke angle = 360 – cutting angle.
9 - Question
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Return angle in degrees is equal to
a) 147.2
b) 112.3
c) 156
d) 132.8
View Answer
Explanation: Use simple geometry in a triangle to find cutting angle. Return stroke angle = 360 – cutting angle.
10 - Question
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Length of stroke in mm will be
a) 447.2
b) 312.3
c) 56
d) 360.3
View Answer
Explanation: Use simple geometry in a triangle to find cutting angle. Return stroke angle = 360 – cutting angle. Cutting angle = 47.2 degree.