# MCQs on Fluid Pressure Sensors

1 - Question

How is pressure (p) defined in terms of force(F) and area(A)?
a) p = F*A
b) p = F+A
c) p = F/A
d) p = F-A
Explanation: Pressure is defined as force per unit area (i.e) pressure (p) = force (F)/Area of cross-section (A). The standard unit of force and area taken is Newton and (meter)2respectively.

2 - Question

What is the SI unit of pressure?
a) Pascal
b) Barye
c) Atm
d) Newton
Explanation: Pascal is the SI unit of pressure. 1 pascal = 1 Newton of force applied on 1 square meter of area. Barye is the CGS unit of pressure. Atm is used to measure atmospheric pressure, whereas Newton is unit of force.

3 - Question

1 atm = ____ pascal or ______bar.
a) 101325, 101.325
b) 101325, 9.81
c) 1.01325, 101325
d) 101325, 1.01325
Explanation: 1 atm = 101325 Pascal or 1.01325 bar. 1 atm is the atmospheric pressure above the sea level (i.e) pressure exerted by the atmosphere above the sea level. Pascal is the SI unit of pressure and 1 atmospheric pressure is equal to 101325 Pascal. advertisement

4 - Question

Whose pressure can be determined by the bourdon tube pressure gauge?
a) Solids
b) Fluids
c) Only Gas
d) Only liquids
Explanation: Bourdon tube can determine the pressure of the fluids. Fluids include all the materials that can flow, be it gas or liquid. Bourdon tube is curved, hollow tube. When the pressure in the tube increases, it causes a deformation in the shape of the tube. This deformation is used to determine the amount of pressure exerted by the fluid in the tube.

5 - Question

Absolute pressure is the sum of over pressure and atmospheric pressure.
a) True
b) False
Explanation: Absolute pressure is the sum of over pressure and atmospheric pressure. Over pressure is commonly known as gauge pressure, therefore P(abs)={P(over) or P(gauge)}+P(atm).

6 - Question

Gauge pressure is the summation of absolute pressure and atmospheric pressure.
a) True
b) False
Explanation: Gauge pressure is the not summation of absolute pressure and atmospheric pressure. It the difference between the absolute pressure and atmospheric pressure (i.e)P(gauge)=P(abs)-P(atm).

7 - Question

Which is not equal to 1 atmospheric pressure?
a) 101325 Pascal
b) 1.01325 Bar
c) 101.325 torr
d) 760 torr
Explanation: 101.325 torr is not equal to 1 atmospheric pressure. 1 atmospheric pressure is equal to 101325 pascal or 1.01325 bar or 760 torr. Pascal is the SI unit of pressure.

8 - Question

Which fluid is commonly used in U-tube manometers as a reference, in determining the pressure of the liquid?
a) Sodium
b) Argon
c) Water
d) Mercury
Explanation: Mercury is commonly used fluid in U-tube manometers as a reference, in determining the pressure of the liquid. The specific gravity of mercury is 13.6 which mean that it is 13.6 times heavier than water.

9 - Question

What is the pressure experienced by a wall, if a brick is thrown with a force 10 Newton and cross-section area of contact is 2 square metres?
a) 5 Pascal
b) 5 Atm
c) 5 barye
d) 1 Atm
Explanation: Given: Force of brick thrown=10 Newton Cross-section area=2m2 Since pressure (p)=Force of brick thrown (F)/Area of cross-section (A), P=10N/2m2=5 pascal.

10 - Question

Which is an example of pressure sensor?
a) MSP430G2ET
b) CMCP793V-500
c) SLB700A/06VA
d) BMP180
Explanation: BMP180 is an example of pressure sensor. SLB700A/06VA is an example of force sensor. MSP430G2ET is a development board manufactured by the “TEXAS INSTRUMENTS” and CMCP793V-500 is a velocity sensor.

11 - Question

What is the pressure experienced by a pressure sensor, if a rigid body is thrown normally with a force 5 Newton and cross-section area of contact is 1 square metre?
a) 5 Pascal
b) 5 Atm
c) 5 Barye
d) 1 Atm
Explanation: Given; Force of brick thrown=5 Newton Cross-section area=1 m2 Since pressure (p) = Force of brick thrown (F)/Area of cross-section (A), P=5N/1m2=5 Pascal.

12 - Question

What is the absolute pressure experienced by a pressure sensor, if the atmospheric pressure of a fluid is 2 atm, gauge pressure is 5 atm and differential pressure is 3 atm?
a) 5 pascal
b) 5 Atm
c) 7 barye
d) 7 Atm
Explanation: Given; Atmospheric pressure=2 atm Gauge pressure=5atm Differential pressure=3 atm Absolute pressure=Gauge pressure+Atmospheric pressure Absolute pressure=5atm+2atm => 7atm

13 - Question

What is the gauge pressure experienced by a pressure sensor, if the atmospheric pressure of a fluid is 1 atm, absolute pressure is 6 atm and differential pressure is 2 atm?
a) 5 pascal
b) 5 Atm
c) 5 barye
d) 1 Atm
Explanation: Given; Atmospheric pressure = 1 atm Absolute pressure = 6 atm Differential pressure = 3 atm Gauge pressure = Absolute pressure-Atmospheric pressure Gauge pressure = 6 atm-1atm => 5atm

14 - Question

What is the cross-section area of contact, if a brick is thrown with a force 10 Newton and the pressure experienced by a wall is 5 Pascal?
a) 2m2
b) 5m2
c) 4m2
d) 3m2
Explanation: Given: Force of brick thrown=10 Newton Pressure experienced by a wall=5 Pascal Since pressure (p)=Force of brick thrown (F)/Area of cross-section (A), 5 Pascal=10/A Area of cross-section (A)=2m2

15 - Question

What is the pressure experienced by a pressure sensor, if a rigid body is thrown normally with a force 6 Newton and cross-section area of contact is 2 square metres?
a) 3 Pascal
b) 3 Atm
c) 3 Barye
d) 12 Atm