# Heat Transfer MCQ’s – Turbulent Film Condensation

1 - Question

Which parameter is responsible for the commencement of the turbulent flow?
a) Fourier number
b) Reynolds number
c) Stanton number
d) Nusselt number
Explanation: The character of condensate film can range from laminar to highly turbulent.

2 - Question

The transition from laminar to turbulent flow occurs at a critical Reynolds number of
a) 1800
b) 2200
c) 2600
d) 3000
Explanation: For turbulent film condensation on vertical surfaces, Kirk bride has suggested the correlation for the average heat transfer coefficient which is valid for Reynolds number greater than 1800.

3 - Question

A condenser is to be designed to condense 225.0 kg of steam per hour at a pressure of 0.15 bar. A square array of 400 tubes, each of 6 mm in diameter, is available for the task. If the tube surface temperature is to be maintained at 26 degree Celsius, make calculations for the length of the tube
a) 4.353 m
b) 3.353 m
c) 2.353 m
d) 1.353 m
Explanation: t sat = 54 degree Celsius and h f g = 2373000 J/kg, t f = 40 degree Celsius and h v = 0.725 [k 3 g p 2 h f g/l δ (t sat – t s)] 0.25 = 5202.34 W/m2 K. Total S.A of 400 tubes = 7.536l and heat flow rate = m h f g.

4 - Question

The outer surface of a vertical tube is 1.25 m long and outer diameter is 50 mm is exposed to saturated steam at atmospheric pressure. If the tube surface is maintained at 80 degree Celsius by the flow of cooling water through it, determine the rate of heat transfer to the coolant
a) 47648 W
b) 12345 W
c) 19879 W
d) 97123 W
Explanation: h v = 0.943 [k 3 p 2 g h f g/δ l (t sat – t s)] 0.25 = 5046.8 W/m 2 k and heat flow rate = 19879 W.

5 - Question

Consider the above problem, find the rate at which steam is condensed at the tube surface
a) 7.7 * 10 -3
b) 8.7 * 10 -3
c) 9.7 * 10 -3
d) 10.7 * 10 -3
Explanation: Steam condensation rate = 198789/2285 * 10 3 = 8.7 * 10 -3.

6 - Question

What is the value of characteristics length in turbulent film condensation?
a) δ
b) 3 δ
c) 2 δ
d) 4 δ
Explanation: d = 4 A/P = 4 b δ/b = 4 δ. Where δ is length of the plate.

7 - Question

What is the value of Reynolds number in terms of mass flow rate?
a) 4 m/δ b
b) 2 m/δ b
c) 3 m/δ b
d) m /δ b
Explanation: R = V 4 δ p/δ = 4 m/δ b. Where δ is the length of the plate and b id width of the plate.

8 - Question

Kirk bride criterion is given by
a) h = 0.0057 (Re) 0.4 [k 3 p 2 g/δ 2] 1/3
b) h = 0.0067 (Re) 0.4 [k 3 p 2 g/δ 2] 1/3
c) h = 0.0077 (Re) 0.4 [k 3 p 2 g/δ 2] 1/3
d) h = 0.0087 (Re) 0.4 [k 3 p 2 g/δ 2] 1/3
Explanation: This is valid for Re greater than 1800

9 - Question

The relation between relative effectiveness of horizontal and vertical tubes as condensing surfaces is given by
a) h h/h v = 0.768 (l/d)
b) h h/h v = 0.768 (l/d) 0.25
c) h h/h v = 0.768 (l/d) 0.5
d) h h/h v = 0.768 (l/d) 1.25
Explanation: h h/h v = 0.725/0.943 [(l/d) 0.25].

10 - Question

For n-tubes in a vertical column of the tube bank pattern, identify the correct statement
a) D e = n D
b) D e = n 2 D
c) D e = (1/n) D
d) D e = D