Engineering Questions with Answers - Multiple Choice Questions

Home » MCQs » Chemical Engineering » Thermal Engineering MCQ’s – Reaction Turbines – 1

# Thermal Engineering MCQ’s – Reaction Turbines – 1

The magnitude of velocity of steam relative to moving blade in case of an impulse turbine _____

a) always remains constant as steam glides over the blades

b) depending on friction present on the blades, increases or remains constant as the steam glides over the blades

c) depending on friction present on the blades, decreases or remains constant as the steam glides over the blades

d) depending on friction present on the blades, increases or decreases as the steam glides over the blades

**
View Answer**

Answer: cExplanation: In Impulse turbines the magnitude of velocity of steam relative to the moving blade either remains contant or decreases slightly due to presence of friction on the blades. The ratio of final relative velocity of steam to initial is called the blade velocity coefficient (K).

In case of reaction turbines, the magnitude of velocity of steam relative to moving blade increases as the steam progresses.

a) True

b) False

**
View Answer**

Answer: aExplanation: As the steam flows through the reaction turbine blades, it is continuously expanded. As a result the magnitude of velocity of steam relative to the moving blades increases as the steam flows over the blade.

Which of the following expressions for degree of reaction (Rd) of a reaction turbine stage is correct?

a) Rd=HeatdropinmovingbladesHeatdropinthestage

b) Rd=HeatdropinthestageHeatdropinmovingblades

c) Rd=HeatdropinfixedbladesHeatdropinthestage

d) Rd=HeatdropinthestageHeatdropinfixedblades

**
View Answer**

Answer: a

Explanation: The degree of reaction (Rd) of a reaction turbine stage is defined as the ratio of heat drop in moving blade to the total heat drop in the stage.

Mathematically,

Rd=ΔhmΔhf+Δhm

where, Δhm = heat drop in moving blades and

Δhf = heat drop in the fixed blades.

Which of the following is the correct formula for calculating the degree of reaction of a reaction turbine?

a) Rd=2Cbl(Cw1+Cw2)C2r2−C2r1

b) Rd=C2r2−C2r12Cbl(Cw1+Cw2)

c) Rd=Cbl(Cw1+Cw2)2(C2r2−C2r1)

d) Rd=2(C2r2−C2r1)Cbl(Cw1+Cw2)

**
View Answer**

Answer: b

Explanation: We know that,

Rd=HeatdropinmovingbladesHeatdropinthestage

Since, Heat drop in a moving blade = C2r2−C2r12, and

Heat drop in the stage = Cbl(Cw1 + CW2)

Therefore, Rd=C2r2−C2r12Cbl(Cw1+Cw2)

The degree of reaction of a Parson’s reaction turbine is _____

a) 0%

b) 25%

c) 50%

d) 100%

**
View Answer**

Answer: cExplanation: In Parson’s reaction turbine the degree of reaction is 50%. Also in a Parson’s reaction turbine the shape of moving and the fixed blades is same. Due to this the velocity diagram for the blades of this turbine are symmetrical.

Which of the following statements does NOT hold true for a Parson’s reaction turbine?

a) α = Ф

b) θ = β

c) C1 = Cr2

d) Cr1 = Cr2

**
View Answer**

Answer: dExplanation: Parson’s reaction turbine has same shape for moving and fixed baldes. Which implies, θ = β and α = Ф Also, C1 = Cr2and C2 = Cr1, which results in a symmetrical velocity diagram.

What should be the ratio of blade speed to absolute velocity of steam leaving the nozzle for a Parson’s reaction turbine to work at maximum efficiency?

a) cosα

b) cosβ

c) sinα

d) sinβ

**
View Answer**

Answer: aExplanation: In a Parson’s reaction turbine, the degree of reaction is 50% and the moving and fixed blades are symmetrical. This turbine works at maximum possible efficiency when the ratio of blade speed to absolute velocity of steam leaving the nozzle is equal to cosine of nozzle angle.

The maximum value of efficiency for a Parson’s reaction turbine is _____

a) 2(cos)21+(cosα)2

b) 2(cosα)21+(cosα)2

c) 1+(cosα)22(cosα)2

d) 2(cosα)21+(cosα)2

**
View Answer**

Answer: dExplanation: For a Parson’s reaction turbine, the value of maximum efficiency is 2(cosα)21+(cosα)2. This value is achieved when the ratio of blade speed to absolute velocity of steam leaving the nozzle is equal to cosine of nozzle angle.

The axial force on the blades in Parson’s reaction turbine is always zero.

a) True

b) False

**
View Answer**

Answer: a

Explanation: The velocity diagram of a parson’s reaction turbine is symmetrical, which results in equal flow components of absolute inlet and outlet velocities.

i.e. Cf1 = Cf2

Therefore, axial force on blades = ṁ (Cf1 – Cf2) = 0.

The following data refers to a particular stage of a Parson’s reaction turbine:

Mean blade speed = 90 m/s

Velocity of steam leaving the nozzle = 120 m/s

Nozzle angle = 20°

Mass flow rate of steam = 0.8 kg per second

Calculate the tangential force on the blade.

a) 203.54 N

b) 108.42 N

c) 65.32 N

d) 195.45 N

**
View Answer**

Answer: b

Explanation: Cbl= 90 m/s, α = 20°, C1 = 120 m/s, ṁ = 0.8 kg/s

Steps of Construction:

Select a suitable scale and draw a line LM to represent C_{bl} (=90 m/s).

At point M, at an angle of 20° (α), cut a length MS to represent the velocity C_{1} (=120 m/s). Join LS. Produce L to meet the perpendicular drawn from S at P. Thus inlet triangle is completed.

For a Parson’s turbine:

Ф = α = 20°

and C_{r2}=C_{1} = 120 m/s

At L, at an angle of 20° (Ф), cut a length LN to represent C_{r2}(=120 m/s). Join MN.

Produce M to meet the perpendicular drawn from N at Q. Thus outlet triangle is completed.

By measurement:

C_{w1} = 112.76 m/s and C_{w2} = 22.76 m/s

Tangential force = ṁ(C_{w1} + C_{w2}) = 0.8(112.76 + 22.76) = 108.42 N.

In a single stage Parson’s reaction turbine, the mean blade velocity is observed to be 60 m/s and the nozzle angle to be 20°. Determine the the entrance angle of moving blade if the absolute velocity of the steam leaving the nozzle is 120 m/s.

a) 38°

b) 56°

c) 23°

d) 28°

**
View Answer**

Answer: a

Explanation: Cbl = 60 m/s, α = 20°, C1 = 120 m/s

Steps of Construction:

Select a suitable scale and draw a line LM to represent C_{bl} (=60 m/s).

At point M, at an angle of 20° (α), cut a length MS to represent the velocity C_{1} (=120 m/s). Join LS. Produce L to meet the perpendicular drawn from S at P. Thus inlet triangle is completed.

By measurement:

θ = 38°.

In a reaction turbine, the fixed blades and the moving blades are of the same shape but reversed in direction. The mean blade speed is 30 m/s. The absolute velocity of the steam leaving the nozzle is 90 m/s and the absolute velocity of steam leaving the moving blade is 64 m/s. Determine the nozzle angle.

a) 20°

b) 25°

c) 30°

d) 35°

**
View Answer**

Answer: b

Explanation: Given, Cbl = 30 m/s, C0 = Cr1 = 64 m/s, C1 = 90 m/s

Steps of Construction:

Select a suitable scale and draw a line LM to represent C_{bl} (= 30 m/s).

At point M, draw an arc of length corresponding to C_{1} (90 m/s). At point L, draw an arc of length corresponding to length 64 m/s, cutting the previous arc at S. The inlet triangle is complete.

By measurement:

α = ∠LMS = 25°.

In a Parson’s reaction turbine, the outlet angle of blade is 25°. Calculate the work done per second by the blades if the blade mean blade speed is 60 m/s and the absolute velocity of the steam leaving the nozzle is 120 m/s. The mass flow rate of steam is 0.1 kg per second.

a) 756 W

b) 854 W

c) 945.12 W

d) 1065 W

**
View Answer**

Answer: c

Explanation: Given, α = Ф = 25°, Cbl = 60 m/s, C1 = 120 m/s, ṁ = 0.1 kg/s

Steps of Construction:

Select a suitable scale and draw a line LM to represent C_{bl} (= 60 m/s).

At point M, at an angle of 25° (α), cut a length MS to represent the velocity C_{1} (= 120 m/s). Join LS. Produce L to meet the perpendicular drawn from S at P. Thus inlet triangle is completed.

For a Parson’s turbine:

Ф = α = 25°

and C_{r2}= C1 = 120 m/s

At L, at an angle of 25° (Ф), cut a length LN to represent C_{r2}(= 120 m/s). Join MN.

Produce M to meet the perpendicular drawn from N at Q. Thus outlet triangle is completed.

By measurement:

C_{w1} = 108.76 m/s and C_{w2} = 48.76 m/s

Work done per second = ṁ (C_{w1} + C_{w2}) C_{bl} = 0.1 (108.76 + 48.76) 60 = 945.12 W

In a single stage reaction turbine, the mean blade velocity is observed to be 200 m/s and the nozzle angle is 20°. The absolute value of the steam leaving the nozzle is 350 m/s. The factor with which the relative velocity of steam changes wit respect to the moving is 2.1. If the moving blade inlet and outlet aangles are equal then calculate the degree of reaction of the turbine.

a) 50%

b) 66%

c) 75%

d) 84%

**
View Answer**

Answer: b

Explanation: Given, Cbl = 200 m/s, α = 20°, C1 = 350 m/s, K = 2.1, θ = Ф

Steps of Construction:

Select a suitable scale and draw a line LM to represent C_{bl} (= 200 m/s).

At point M, at an angle of 20° (α), cut a length MS to represent the velocity C_{1} (= 350 m/s). Join LS. Produce L to meet the perpendicular drawn from S at P. Thus inlet triangle is completed.

By measurement:

θ = 43° and C_{r1} = 175.91 m/s

It Is givne that, Ф = θ = 43° and C_{r2}= KC_{r1} = 2.1 (175.91) = 369.41 m/s

At L, at an angle of 43° (Ф), cut a length LN to represent C_{r2}(= 369.41 m/s). Join MN.

Produce M to meet the perpendicular drawn from N at Q. Thus outlet triangle is completed.

By measurement:

C_{w1} = 328.89 m/s and C_{w2} = 70.70 m/s

Degree of Reaction, R_{d}=C2r2−C2r12Cbl(Cw1+Cw2)=369.412−175.9122∗200(328.89+70.70) = 0.66 or 66%.