Engineering Questions with Answers - Multiple Choice Questions
Polymer Engineering MCQ’s– Natural Rubber
1 - Question
Which tree gives out the latex to obtain natural rubber?
b) hevea brasiliensis
Explanation: Hevea tree produces a milk-white latex that contains the natural rubber hydrocarbon present in the form of fine emulsion in an aqueous serum which is then later processed to give natural rubber.
2 - Question
Which substance is added to the dilute latex to prevent darkening of latex?
a) sodium bisulfite
b) potassium sulfite
c) sodium sulfate
d) potassium sulfate
Explanation: A little amount of sodium bisulfite is added to the dilute latex before tapping to prevent darkening or discoloration of the latex which may otherwise develop as a consequence of an enzymatic reaction in the latex involving its phenolic constituents producing the dark coloured pigment melanin.
3 - Question
Which component has the maximum composition in the Hevea rubber latex?
a) rubber hydrocarbon
Explanation: Hevea latex consist of 55-65 % of water, 30-40% of rubber hydrocarbon while proteins and sugars are present in little amount.
4 - Question
Which of the following represents natural rubber chemically?
a) cis 1,4-polyisoprene
b) trans 1,4-polyisoprene
c) cis 1,3-polyisoprene
d) trans 1,3-polyisoprene
Explanation: Natural rubber is chemically known by cis 1,4-polyisoprene. This structure of natural rubber was confirmed by identifying the products derived from its ozonolysis.
5 - Question
Consider the following statements about hydrocarbons of natural rubber and gutta percha. I. They have same elementary formula. II. They have same molecular weight. III. Rubber hydrocarbon has low specific gravity than gutta percha. Which of the following statements are true?
a) I, III
b) I, II, III
c) II, III
d) I only
Explanation: The hydrocarbons of natural rubber and gutta percha are the same in elementary formula and in their products of ozonolysis. Gutta percha has a lower molecular weight than natural rubber and so natural rubber is less dense than gutta percha.
6 - Question
What are the sequential processes through which rubber latex undergo to give natural rubber?
Explanation: The rubber latex from hevea tree firstly undergoes tapping, then it is preserved using a preservative like sodium pentachlorophenate followed by coagulation using acetic acid o formic acid.
7 - Question
What are the temperature and pressure conditions when natural rubber is hydrogenated in the presence of nickel catalyst?
a) 5-10 atm and 180-200 ᵒC
b) 15-20 atm and 180-200 ᵒC
c) 30-35 atm and 100-120 ᵒC
d) 15-20 atm and 100-120 ᵒC
Explanation: The hydrogenation of rubber can be conveniently done by taking solutions of rubber in 2-3% of cyclohexane using hydrogen at a pressure of 15-20 atm and 180-20 ᵒC and employing nickel catalyst.
8 - Question
How much would the unsaturation of cyclized rubber reduce to its original when it forms polycyclic structure?
Explanation: Cyclization reaction of rubber leading to the formation of bi- or even polycyclic structures result in the reduction in unsaturation to 20-30% of the original rubber, while the formation of monocyclic structure lead to the drop in unsaturation by 57% of original.
9 - Question
What kind of product is obtained on chlorination of natural rubber?
d) none of the mentioned
Explanation: The chlorinated rubber formed by chlorination of natural rubber is resinous in character while natural rubber is elastomeric in nature.
10 - Question
Which solvent is used to dissolve rubber pieces in the process of chlorination of natural rubber?
a) carbon tetrachloride
Explanation: In the process of chlorination, rubber small pieces of rubber are dissolved in carbon tetrachloride in presence of a small amount of benzoyl peroxide which act as a depolymerizing agent and lowers the solution viscosity.
11 - Question
Which of the following information about chlorinated rubber is wrong?
a) it resists concentrated nitric acid
b) it is used as heat sealable package for dry food
c) it has flame retardant characteristics
d) it is resinous in character
Explanation: Hydrochlorinated rubber is used as heat sealable package for dry foods whereas chlorinated rubber is used in formulation of paints, lacquers, adhesives and printing inks.
12 - Question
Which solution is used for hydrochlorination of natural rubber with HCl gas?
c) carbon tetrachloride
Explanation: Hydrochlorinated rubber is conveniently obtained by hydrochlorination with gaseous HCl using rubber in benzene solution.