Engineering Questions with Answers - Multiple Choice Questions
Polymer Engineering MCQ’s – Identification of Common Plastics and Rubbers-1
1 - Question
A rubber polymer sample A is reacted with chromic acid solution and yields acetic acid solution. Compound A also gives positive Weber test. Which of the following is possibly A?
a) 1,4-polyisoprenes
b) butyl rubber
c) nitrile butadiene rubber
d) all of the mentioned
View Answer
Explanation: 1,4-polyisoprenes yield acetic acid with chromic acid solution which is identified by its odour. It also gives positive weber test.
2 - Question
Which of the following does not give positive weber test of rubbers?
a) natural rubber
b) butyl rubber
c) polyisoprene rubber
d) styrene butadiene rubber
View Answer
Explanation: In weber test, acetone-extracted polymer is dissolved in carbon tetrachloride with little bromine solution and then heated to remove excess bromine. The residue is then warmed in little phenol. The solution turns violet or purple due to presence of poluisoprenes, and so his test is positive for NR, IR and butyl rubber.
3 - Question
Polysulphide rubbers when treated with trichloroacetic acid imparted colour X, which turned to colour Ysolution on boiling and then colour Z precipitate on dilution. Which set of colours represent X, Y, Z, respectively?
a) pink, red-brown, grey
b) pink, ruby-red, rose-pink
c) pink, red-brown, yellow
d) pink, ruby-red, yellow
View Answer
Explanation: Polusulphide rubbers give pink colour on treatment with trichloroacetic acid which turns ruby-red solution on boiling, giving rose-pink precipitate on dilution.
4 - Question
Which of the following rubbers when treated with trichloroacetic acid give pink-mauve melt and on dilution give grey-mauve precipitate?
a) isomerized rubber
b) acetone-extracted NR
c) gutta percha
d) all of the mentioned
View Answer
Explanation: Acetone-extracted NR, isomerizaed rubber and gutta percha when warmed with trichloroacetic acid give pink-mauve melt and on dilution with water result in grey-mauve precipitate.
5 - Question
Which of the following rubber do not respond to trichloroacetic acid?
a) isomerized rubber
b) chlorinated rubber
c) polysulphide rubber
d) butyl rubber
View Answer
Explanation: Chlorinated rubber does not produce any effect when treated with trichloroacetic acid.
6 - Question
A strip of filter paper dissolved in ethereal solution containing p-dimethylamino benzaldehyde and hydroquinone and then moistened with a 30% solution of trichloroacetic acid in isopropanol produces blue-violet colour in the presence of pyrolytic vapours of rubbers A and B. Which of the following pair represent rubbers A and B?
a) natural rubber and butyl rubber
b) styrene butadiene rubber and silicone rubber
c) styrene butadiene rubber and natural rubber
d) natural rubber and nitrile butadiene rubber
View Answer
Explanation: The pyrolytic vapours of natural rubber and butyl rubber both produce deep-blue or blue-violet colour to the paper.
7 - Question
Which of the following rubbers turn the filter paper in ethereal solution containing p-dimethylamino benzaldehyde and hydroquinone and then moistened with a 30% solution of trichloroacetic acid in isopropanol grey with a yellow tinge?
a) natural rubber
b) silicones
c) polychloroprenes
d) butyl rubbers
View Answer
Explanation: The pyrolytic vapours of polychloroprenes turn the filter paper grey with a yellow tinge.
8 - Question
What colour is obtained by the pyrolytic vapours of butyl rubber on the filter paper freshly soaked in a solution obtained by dissolving yellow mercuric oxide in conc. sulphuric acid and water on boiling?
a) bright yellow
b) grey
c) blue
d) brown-yellow
View Answer
Explanation: Pyrolytic vapours of butyl rubber produce a bright yellow colour on filter paper freshly soaked in a solution obtained by dissolving yellow mercuric oxide in conc. sulphuric acid and water on boiling.
9 - Question
Which of the following do not respond to the Molisch test for carbohydrates?
a) cellulose acetate
b) viscose rayon
c) cellulose nitrate
d) none of the mentioned
View Answer
Explanation: Cellulose acetate and viscose rayon both give purple colour when Molisch test is performed to them. Cellulose nitrate does not respond to this test at all.
10 - Question
What colour is obtained when a drop of diphenylamine solution in concentrated sulphuric acid is added to the sample of cellulose nitrate in the absence of other oxidizing agents?
a) deep blue
b) yellow
c) grey
d) red
View Answer
Explanation: A deep blue colour product is obtained when a drop of diphenylamine solution in concentrated sulphuric acid is added to the sample of cellulose nitrate in the absence of other oxidizing agents.
11 - Question
The aqeous extracts of some polymers when tested with chomotropic solution followed by addition of sulphuric acid and then heating to nearly 100 C gave dark violet colour. Which of the following cannot respond to this test?
a) polyvinyl formal
b) polyoxymethylenes
c) urea-formaldehyde resisns
d) polyacrylonitrile
View Answer
Explanation: The polymers containing or liberating formaldehyde can turn the solution dark violet. Thus, polyacrylonitrile does not respond to this test.
12 - Question
What colour is obtained if condensed pyrolyzate of polyacrylonitrile is made alkaline and boiled with ferrous sulphate followed by acidification?
a) ruby-red
b) prussian blue
c) bright blue
d) red-brown
View Answer
Explanation: Prussian blue precipitate is obtained on the treatment of pyrozylate of polyacrylonitrile.
13 - Question
A strip of cupric acid paper, freshly moistened with a dilute solution of benzidine in dilute acetic acid is held in the pyrolytic vapours of polymer A and a bright blue colouration is obtained. Which of the following could be polymer A?
a) polyamide
b) polyacryonitrile
c) butyl rubber
d) polyvinyl formal
View Answer
Explanation: Pyrolytic vapours of polyacrylonitrile respond to this test and develop bright blue colouration.
14 - Question
What colour is obtained when a strip of filter paper soaked in saturated solution of o-nitrobenzaldehyde in dilute NaOH is held over the prylotic vapours of Nylon 6,6?
a) grey
b) black
c) red
d) yellow
View Answer
Explanation: The pyrolytic vapours of Nylon 6,6 gives mauve-black colour, when a strip of filter paper soaked in saturated solution of o- nitrobenzaldehyde in dilute NaOH is brought near it.
15 - Question
Which of the following polymer will not give grey colour when their pyrolytic vapours are tested with a strip of filter paper soaked in saturated solution of o- nitrobenzaldehyde in dilute NaOH?
a) Nylon 6
b) Nylon 66
c) Nylon 12
d) Nylon 11
View Answer
Explanation: This test is positive only for the polyamides containing diacids other than adipic acid. Nylon 66 contains adipic acid.