Engineering Questions with Answers - Multiple Choice Questions

MCQs on Tuned Circuits

1 - Question

What is reactance?
a) Resistance offered to ac current by resistor only
b) Resistance offered to dc current by resistor
c) Resistance offered to ac current by coil and capacitance
d) Resistance offered to dc current by coil and capacitance

View Answer

c
Explanation: Both coils and capacitors offer an opposition to alternating current flow known as reactance, which is expressed in ohms. Like resistance, reactance is an opposition that directly affects the amount of current in a circuit.




2 - Question

What happens to the current when it passes through a capacitor?
a) Phase of voltage leads the current
b) Phase of current leads the voltage
c) Phase of current and voltage cancel out each other
d) Phase of current and voltage gets added

View Answer

b
Explanation: In addition to resistance of alternating current flow, a capacitor alters the phase difference between the current and voltage. The capacitor lowers the phase of the voltage and hence the current leads the voltage.




3 - Question

What happens to the voltage when it passes through an inductor/coil?
a) Phase of voltage leads the current
b) Phase of current leads the voltage
c) Phase of current and voltage cancel out each other
d) Phase of current and voltage gets added

View Answer

a
Explanation: In addition to a resistance of alternating current flow, an inductor/coil alters the phase difference between the current and voltage. The inductor/coil lowers the phase of the current and hence the voltage leads the current.




4 - Question

A capacitor used in an ac circuit continually charges and discharges.
a) True
b) False

View Answer

a
Explanation: In an ac power supply the voltage increases and decreases with a particular frequency. During the first half cycle, the capacitor gets charged and in the other half, it gets discharged. The same process repeats throughout the wave.




5 - Question

What happens to capacitative reactance when operating frequency is increased?
a) Increases
b) Decreases
c) Remains constant
d) goes to infinite

View Answer

b
Explanation: Capacitative reactance is inversely proportional to the operating frequency and is given by the formula Xc= 1/2πfC where C is the capacitance value in Farad.




6 - Question

Calculate the reactance of a 100-pF capacitor at an operating frequency of 2 MHz?
a) 200Ω
b) 700.16Ω
c) 796.2Ω
d) 2Ω

View Answer

b
Explanation: Capacitative reactance =Xc= 1/2πfC = 1/(2 x 3.14 x 2 x 106 x 100 x 10-12) = 796.2Ω.




7 - Question

Which one of the following is false with respect to stray capacitance?
a) Reduces with decrease in size of lead wires
b) Reduces when chip capacitors are used
c) Increases when lead wires a are lengthy
d) Increases with less capacitance value

View Answer

d
Explanation: The lead wires of capacitors behave as a complex RLC circuit and generate stray capacitance. This can be reduced by shortening the length of the lead wires or using chip capacitors. However, decreasing or increasing the value of capacitance does not affect stray capacitance.




8 - Question

What happens to inductive resistance when operating frequency is increased?
a) Increases
b) Decreases
c) Remains constant
d) Goes to infinite

View Answer

a
Explanation: Inductive reactance is directly proportional to the operating frequency and is given by the formula Xf= 2πfL where L is the inductance value in Henry.




9 - Question

What is the inductive reactance of a 40-μH coil at 18 MHz?
a) 4000Ω
b) 4522Ω
c) 4522H
d) 0

View Answer

b
Explanation: Inductive reactance = XL=2πfL = 2 x 3.14 x 18 x 106 x 40 x 10-6 = 4522Ω.




10 - Question

What is the Q factor for a 3-μH inductor with a total resistance of 45Ω at 90 MHz?
a) 37.68
b) 37.68Ω
c) 29.22Ω
d) 32.75Ω

View Answer

a
Explanation: Quality factor = Q = 2πfL/R = (2 x 3.14 x 90 x 106 x 3 x 10-6)/45 = 1695.6 / 45 = 37.68.




11 - Question

What is the resonant frequency of a 2.7-pF capacitor and a 33-nH inductor?
a) 512MHz
b) 720GHz
c) 250MHz
d) 533MHz

View Answer

d
Explanation:

<img src="https://mocktestpro.in/wp-content/uploads/2021/09/avionics-questions-answers-tuned-circuits-q11-300x33.png" alt="" width="300" height




12 - Question

What is the bandwidth of a resonant circuit with a frequency of 28 MHz and a Q of 80?
a) 350KHz
b) 30KHz
c) 42.7KHz
d) 57.05MHz

View Answer

a
Explanation: Bandwidth = resonant frequency / Quality factor = 28 x 106 /80 = 350KHz.

Get weekly updates about new MCQs and other posts by joining 18000+ community of active learners