Engineering Questions with Answers - Multiple Choice Questions

# Machine Kinematics MCQ – Chain Drives

1 - Question

What is the purpose of using steel chains?
a) To avoid slipping
b) To avoid friction
c) To avoid accelerated motion
d) To avoid jerks

Explanation: In belt and rope drives, it is observed that slipping may take place. In order to avoid the issue of slipping, steel chains are being used.

2 - Question

The chains are made up of rigid links which are hinged together in order to avoid flexibility for warping around the driving and driven wheels.
a) True
b) False

Explanation: The chains are made up of rigid links which are hinged together in order to provide the necessary flexibility for warping around the the two sets of wheels, i.e. driving and driven wheels.

3 - Question

The toothed wheels in chain drives are known as ______
a) Sprockets
b) Sprockers
c) V-belt
d) V- chain

Explanation: The wheels and the chain are subjected to a constraint to move together without slipping and ensures perfect velocity ratio. The toothed wheels are known as sprocket wheels or sprockets.

4 - Question

Which of the following is true regarding chain drives?
a) The chain drives may be used when the distance between the shafts is less
b) The production cost of chains is relatively low
c) The chain drive needs low maintenance
d) The chain drive has no velocity fluctuations

Explanation: The chain drives may be used when the distance between the shafts is less. This is an advantage of using a chain drive over belt or rope drives.

5 - Question

The distance between hinge centres of two corresponding links is known as _______
a) Pitch
b) Pitch circle diameter
c) Sprocket length
d) Sprocker diameter

Explanation: Pitch ‘p’ of the chain is the linear distance between the hinge centre of a link and the corresponding hinge centre of the adjacent link. It is usually denoted by p.

6 - Question

In the figure given below, what the quantity ‘p’ is known as _________

a) Pitch
b) Pitch circle diameter
c) Sprocket length
d) Sprocker diameter

Explanation: In the given figure the quantity p is the Pitch. Pitch of the chain is the distance between the hinge centre of a link and the corresponding hinge centre of the adjacent link.

7 - Question

The diameter of the circle on which the hinge centres of the chain lie is known as _______
a) Pitch
b) Pitch circle diameter
c) Sprocket length
d) Sprocker diameter.

Explanation: Pitch circle diameter of the chain sprocket is the diameter of the circle on which the hinge centres of the chain lie, when the chain is wrapped round a sprocket.

8 - Question

Pitch of the chain lies on the arc of the pitch circle.
a) True
b) False

Explanation: Since the links of the chain are rigid, therefore pitch of the chain does not lie on the arc of the pitch circle. Thus, the given statement is false.

9 - Question

Which of the following chains fall under the category of hoisting and hauling chains?
a) Chain with oval links
b) Closed joint chain
c) Detachable chain
d) Block chain

Explanation: Chains with oval links are used only at low speeds such as in chain hoists and in anchors for marine works. Hence it falls under the above mentioned category.

10 - Question

Which of the following chain is used to provide elevation continuosly?
a) Conveyor chains
b) Power transmitting chains
c) Hoisting chains
d) Hauling chains

Explanation: Conveyer chains are are used for elevating and conveying the materials continuously. The conveyor chains are of the following two types : Detachable or hook joint type chain and Closed joint type chain.

11 - Question

Which of the following chains are used for transmission of power, when the distance between the centres of shafts is short?
a) Chain with oval links
b) Closed joint chain
c) Detachable chain
d) Block chain