Engineering Questions with Answers - Multiple Choice Questions

# Machine Dynamics MCQ– Classification of Cams

1 - Question

Cam size depends upon
a) base circle
b) pitch circle
c) prime circle
d) outer circle

Explanation: Cam size depends upon base circle. The pressure angle of a cam depends upon offset between centre lines of cam and follower,lift of follower and angle of ascent.

2 - Question

Angle of ascent of cam is defined as the angle
a) during which the follower returns to its initial position
b) of rotation of the cam for a definite displacement of the follower
c) through which the cam rotates during the period in which the follower remains in highest position
d) moved by the cam from the instant the follower begins to rise, till it reaches its highest position

Explanation: Angle of ascent of cam is defined as the angle moved by the cam from the instant the follower begins to rise, till it reaches its highest position. Angle of action of cam is defined as the angle moved by the cam from beginning of ascent to the termination of descent.

3 - Question

The pressure angle of a cam depends upon
a) offset between centre lines of cam and follower
b) lift of follower
c) angle of ascent
d) all of the mentioned

Explanation: Cam size depends upon base circle. The pressure angle of a cam depends upon offset between centre lines of cam and follower,lift of follower and angle of ascent.

4 - Question

Angle of action of cam is defined as the angle
a) of rotation of the cam for a definite displacement of the follower
b) through which the cam rotates during the period in which the follower remains in the highest position
c) moved by the cam from the instant the follower begins to rise, till it reaches its highest position
d) moved by the cam from beginning of ascent to the termination of descent

Explanation: Angle of ascent of cam is defined as the angle moved by the cam from the instant the follower begins to rise, till it reaches its highest position. Angle of action of cam is defined as the angle moved by the cam from beginning of ascent to the termination of descent.

5 - Question

Throw of a cam is the maximum distance of the follower from a) base circle b) pitch circle c) root circle d) prime circle

Explanation: Cam size depends upon base circle. Throw of a cam is the maximum distance of the follower from base circle.

6 - Question

Cylindrical cams can be classified as
a) circular
b) tangent
c) reciprocating
d) none of the mentioned

Explanation: A cylindrical cam or barrel cam is a cam in which the follower rides on the surface of a cylinder. In the most common type, the follower rides in a groove cut into the surface of a cylinder. These cams are principally used to convert rotational motion to linear motion parallel to the rotational axis of the cylinder. A cylinder may have several grooves cut into the surface and drive several followers.

7 - Question

The cam follower generally used in aircraft engines is
a) knife edge follower
b) flat faced follower
c) spherical faced follower
d) roller follower

Explanation: The roller followers are extensively used where more space is available such as in stationary gas and oil engines and aircraft engines.

8 - Question

For S.H.M. cam, the acceleration of the follower at the ends of the stroke and aimed stroke respectively, is
a) maximum and zero
b) zero and maximum
c) minimum and maximum
d) zero and minimum

Explanation: For high speed engines, the cam follower should move with cyclodial motion. For S.H.M. cam, the acceleration of the follower at the ends of the stroke and aimed stroke respectively, is
maximum and zero.

9 - Question

Cam angle is defined as the angle
a) during which the follower returns to its initial position
b) of rotation of the cam for a definite displacement of the follower
c) through which, the cam rotates during the period in which the follower remains in the highest position
d) moved by the cam from the instant the follower begins to rise, till it reaches its highest position